Rittal DET-AC III Master, Монтаж, установка и эксплуатация

Страница: 101 / 126

NOTICE
Damage due to compressed air!
Compressed air can damage components such as electronic parts.
● Never clean the system with compressed air.
Precise knowledge of the system(s) in question is required for the performance of
service tasks. This includes:
● DET-AC III Master (Part No. 7338.121)
● DET-AC III Slave (Part No. 7338.321)
● EFD III (Part No. 7338.221)
The respective system type, operating instruction and the Firmware installed when
delivered can be ascertained from the information on the type plate (part number,
serial number, order number).
Before the start of the inspection/maintenance, the current maintenance information
is to be requested from the manufacturer!
Reference to chapter ║ „ task ‟ ║ page reference
Annual inspect./ maintenance Maintenance every 2 years Maintenance every 10 years
Ä
Chapter 11.2.1 “Checking for proper installation”
on page 104
X
Ä
Chapter 11.2.2 “Checking for external damage” on page 104 X
Ä Chapter 11.2.3 “Recording the WA No. / Part No. / F. No.”
on page 104
X
Ä Chapter 11.2.4 “Recording the date of the current mainte-
nance / inspection” on page 104
X
Ä
Chapter 11.2.5 “Recording the current version” on page 104 X
Ä
Chapter 11.2.6 “Checking and recalibrating the air flow
measured values” on page 104
X
Ä Chapter 11.2.7 “Checking current fault messages, history
since last maintenance” on page 105
X
Ä
Chapter 11.2.8 “Performing a lamp test” on page 105 X
Ä
Chapter 11.2.9 “Checking the discharge nozzle for contami-
nation” on page 105
X
Ä
Chapter 11.2.10 “Checking the temperature indicator”
on page 105
X
Ä Chapter 11.2.11 “Checking the setting of date and time”
on page 105
X
Maintenance
Operating Instructions / DET-AC III Master / 916005 / 11-2022 / en_US 101