RITE-HITE Genisys AL-900, Руководство пользователя

Страница: 6 / 32

GENISYS AL-900 Dock Leveler Owner’s Manual
6 Publication:
AMEN00044 2017-01-27
OTHER IMPORTANT OPERATIONAL SAFETY WARNINGS
NEVER be under the dock leveler platform or lip
without:
• Installing the Maintenance Support. See below
right. This can be done with the assistance of
another person by:
- Raise leveler until platform reaches its highest
position and lip extends. Continue to maintain
this position.
- Then have assistant insert the Maintenance
Support over the base located on the leveler’s
front frame.
- Release the pushbutton on powered levelers
allowing the support to rest inside the lip cup
on the underside of the lip.
• Lockout/Tagout power supply.
- Turn off the power to the control box.
- Lockout/tagout the main power source, as
shown under Safety Warnings on the inside
front cover of this manual.
- Always barricade the leveler at dock level and
drive level to prevent any unauthorized use of
the leveler.
Remove the Maintenance Support.
• For Maintenance Support removal, have an
assistant raise the leveler to its highest position
with lip fully extended. Lift the support off base.
Return the Maintenance Support to the proper
storage position.
• If you are unable to install the Maintenance
Support properly, contact your authorized
Rite-Hite Service Representative or Rite-Hite
Customer Service at 1-414-355-2600.
• Post warnings and barricades at dock level and
at drive level to indicate that work is being done
around and under the leveler platform.
• Lockout/Tagout power to the leveler and post
warnings when work is being performed on the
leveler.
FIGURE 2 - INSTALL MAINTENANCE SUPPORT
INSERT INTO CUP
INSERT ONTO BASE