RITE-HITE Genisys AL-900, Руководство пользователя

Страница: 12 / 32

GENISYS AL-900 Dock Leveler Owner’s Manual
12 Publication:
AMEN00044 2017-01-27
LIP LATCH BOLT ADJUSTMENT
The lip latch bolt is factory adjusted Over time however, if
the lip does NOT latch when the leveler is fully raised and
remain latched as the platform lowers, the lip latch bolt
may need to be readjusted Use the following procedure to
readjust the lip latch bolt:
1. Loosen the jam nuts on the lip latch bolt. See figure
12.
2 Turn the bolt clockwise one full turn at a time See
figure 12.
3 Tighten the jam nuts on the lip latch bolt
4. Follow normal operating procedures to verify that the
lip latch has been adjusted correctly and holds the
lip out as the platform lowers Test unit three times to
make sure it latches all three times, if not readjust
NOTE: DO NOT over adjust the lip latch bolt When
properly adjusted the lip should just latch in If you
have over adjusted the lip may not release, or it
will bend the delatch rod over time Re-adjust bolt
until lip no longer latches and then make one full
turn of the bolt until lip just latches
LIP STOP BOLT ADJUSTMENT
The lip stop bolt adjusts the position of the lip when the
leveler is stored to allow the lip to be centered on lip
supports when stored
1 1/8” Preset
Flat On Bolt Head To Be Parallel To
Bottom Of Lip Crank Mount.
FIGURE 12 - LIP LATCH BOLT ADJUSTMENT
FIGURE 13 - LIP STOP BOLT
Lip
Centered In
Keepers
Lip
Stop Bolt
LEVELER ADJUSTMENTS