Riso MZ1070 Скачать руководство пользователя страница 85

Страница: 85 / 150

[ 15-51 ]

MZ870 / MZ890 / MZ1070 / MZ1090

(Revision 0.9)

TEST MODE

No.

Data setting

Print drum

changeover

3570

RLP Print Position Adjustment (Main)

–

Description

Adjusts RLP print position (main scanning direction = Horizontal adjustment).

* If multiple RLP units are installed, this setting will affect all units.

Setting

Setting range: –50 to +50 (–5.0 mm to +5.0 mm)

Setting unit: 1 (0.1 mm)

Default: 0 (0 mm)

* <+> moves to the left.

3571

RLP Print Position Adjustment (sub scanning direction = Vertical adjustment))

–

Description

Adjusts RLP print position (sub scanning direction).

* If multiple RLP units are installed, this setting will affect all units.

Setting

Setting range: –50 to +50 (–5.0 mm to +5.0 mm)

Setting unit: 1 (0.1 mm)

Default: 0 (0 mm)

* <+> moves up

3572

Zero Print Master-making Warning

–

Description

When auto-link is turned ON and if master-making is performed with the print
quantity set to 0 in PtoP mode (scan-to-print), this setting determines whether

the warning (F60) is displayed or not.

Setting

Setting
range:

0: (No warning message display.)

1: (Warning message is displayed.)

Default: 0: (No warning message display.)

3579

RLP Duplex Print Auto-Repeat

–

Description

Selection of whether the duplex printing selection is reset to simplex (OFF) or
the duplex printing is automatically recalled for the next print job.

Setting

Setting
range:

0: (OFF)

1: (Duplex setting is recalled)

Default: 1: (Duplex setting is recalled)

12. Test Mode for Optional Unit (Linked Printer)

Содержание MZ1070























































































































































Результаты поиска

Содержание MZ1070

Отзывы:

Riso MZ1070, Техническое руководство, Страница: 85 / 150

Результаты поиска

Содержание MZ1070

Отзывы: