Riso MZ1070, Техническое руководство, Страница: 62 / 150

[ 15-28 ] MZ870 / MZ890 / MZ1070 / MZ1090 (Revision 0.9)
TEST MODE
No. Unit check
Print drum
changeover
0681
Paper feed tray maximum up positioning
–
Raises the paper feed tray to the paper feed position when the Start key is pressed.
0682
Paper feed tray elevation up & down
–
Repeats the paper feed tray raising and lowering operations.
0683
Paper feed tray maximum down positioning
–
Lowers the paper feed tray to the lower-limit position when the Start key is pressed.
0684
Separation Pump Solenoid ON/OFF Action
B
Turns the solenoid ON when the Start key is pressed. The solenoid automatically switches
OFF after 10 seconds.
0687
Paper Feed Reverse-rotation Prevention Solenoid ON/OFF Action
–
Turns the solenoid ON when the Start key is pressed. The solenoid automatically switches
OFF after 10 seconds.
0688
Paper-feed clutch ON/OFF action
– Turns the clutch ON when the Start key is pressed. The clutch automatically switches OFF
after 10 seconds.
0702
Guide Roller Release Motor
–
Repeats nipping and releasing operations when the Start key is pressed.
0703
Paper Ejection Wing Home Action
–
Moves the paper ejection wings to the home positions.
0704
Paper Ejection Wing Target Shift
–
Moves the wings to the positions set in Test Mode No. 780.
0705
Multiple Paper Feed Detection Sensor Sensitivity Automatic Adjustment
– One sheet of thin RISO paper must be set at the multiple paper feed sensor position during
this procedure.
0707
Central Flap Motor (Normal)
–
Repeats the flat movement between the up and down positions when the Start key is
pressed.
0708
Elevator motor ON action
–
Rotates the elevator motor for raising operation (maximum time: 10 sec).
Caution: Disconnect the Elevator motor from the machine before activating this test
mode, or the machine will be damaged.
0709
Registration Sensor Sensitivity Automatic Adjustment
–
One sheet of thin RISO paper must be set at the registration sensor position during this
procedure.
0721 Paper width potentiometer data
Displays the paper width (mm) to the first decimal
place after adjustment.
–
0722 Multiple Paper Feed Sensor
Displays the A/D value of the multiple paper feed
sensor (paper sensor).
–
0723 Registration Sensor Displays the A/D value of the registration sensor. –
No. Data setting
Print drum
changeover
0740
Elevator upper-limit position selection
–
Description
Selects the paper feed tray stop position (paper feed position).
In the case of <Auto>, the upper-limit position is linked to the paper feed
pressure lever position. The position is fixed in settings <1> through <3>.
Setting
Setting range:
0 (Auto. Linked to paper feed pressure lever position)
1 (Normal position)
2 (Card position)
3 (Custom position)
Default: 0 (Auto. Linked to paper feed pressure lever position)