manualshive.com logo in svg

Riso MZ1070, Техническое руководство, Страница: 37 / 150

Поделиться
Скачать
Riso MZ1070 Скачать руководство пользователя страница 37

[ 14-3 ]

MZ870 / MZ890 / MZ1070 / MZ1090

 (Revision 0.9)

MASTER MAKING SECTION

1.  Pull out the Master making unit from the machine, turn OFF the machine power and disconnect the  
 

power cord from the machine.

2.  Open the Master making upper unit and remove the Cutter cover assembly.
3.  Remove the Master positioning sensor cover. (1 screw)
4.  Disconnect the connector, and remove the Master positioning sensor.

Removing the Master Positioning Sensor

Master positioning sensor cover

Master positioning sensor

Master positioning sensor cover

Master positioning sensor bracket

The mounting screw on this bracket must not be loosened.
The mounting position is set by a JIG at the factory.

DO NOT LOOSEN THIS SCREW !

Master positioning sensor bracket

The mounting screw on this bracket must not be loosened.
The mounting position is set by a JIG at the factory.

Содержание MZ1070























































































































































Отзывы:

Нет отзывов