Riso CZ180 Series Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 92

Riso CZ180 Series Скачать руководство пользователя страница 56

Replacing the Ink Cartridge

56

Replacing and Disposing

Consumables

Replacing the Ink Cartridge

When the Ink Cartridge becomes empty, the Replace Ink Cartridge Indicator lights. Replace with a new Ink Cartridge.

B

Caution:

• Because ink may have adhered to the outlet surface of the Print Drum (Cylinder), be careful not to get your hands

and clothes dirty.
Rinse your hand using a detergent immediately if stained with ink.

Important!:

• For the Ink Cartridge, it is recommended to use the products specified by RISO.
• Before replacing the Ink Cartridge, turn the machine on.
• Make sure to use the Ink Cartridge of the same color (colour) ink. If you want to change the ink color (colour),

replace the Print Drum (Cylinder) itself.

1

Press the

key.

Make sure that the Print Drum (Cylinder) Release
indicator is tuned on.

Important!:

• If you forcibly pull out the Print Drum (Cylinder)

when its release indicator is turned off, the Print
Drum (Cylinder) may be damaged.

2

Pull out the Print Drum (Cylinder).

Grasp the Print Drum (Cylinder) Handle and pull
out the Print Drum (Cylinder) until it stops.

CZ180_UG.book Page 56 Wednesday, October 31, 2007 6:19 PM

«
...
54
55
56
57
58
...
»

Содержание CZ180 Series





























































































Отзывы:

Нет отзывов