Rishabh RISH PFC 8 Скачать руководство пользователя страница 45

Страница: 45 / 88

RELAY ACTIVATION

OVER COMPENSATION : In Auto mode if all banks are
ON (except Fixed banks) and if Diff. to PF exceeds
threshold of lower bank KVAr value PFC will activate
relay if enabled.

Press ENTER key to enter into over compensation sub
setup.
Pressing UP or DOWN key will scroll through submenus.

RELAY ACTIVATION : PFC allows to activate /
deactivate assigned relay.

Press ENTER key to edit option.
Press UP or DOWN key to get available options. Then
press ENTER key to confirm newly changed option.

Note :

- 1. Relay will reset if Diff. to PF goes below

threshold of lower bank kvar value.

OVER COMPENSATION

OUT OFF BANKS

OUT OF BANKS : In Auto mode if all banks are ON
and still target PF is not achieved PFC will operate
relay if activated.

Press ENTER key to enter into OUT OF BANK sub setup.
Pressing UP or DOWN key will scroll through submenus.

RELAY ACTIVATION

RELAY ACTIVATION : PFC allows user to activate /
deactivate assigned relay.

Содержание RISH PFC 8

























































































Результаты поиска

Содержание RISH PFC 8

Отзывы:

Бренды по названию

Популярные бренды

Rishabh RISH PFC 8, Руководство по эксплуатации

Результаты поиска

Содержание RISH PFC 8

Отзывы:

Бренды по названию

Популярные бренды