Risco Agility, Руководство пользователя

Страница: 11 / 32

Agility User Manual
Page 11
Chapter 2 Local System Operation
2.1 Arming your system
Arming your system causes the intrusion detectors to trigger an alarm when violated. The
arming operation will be followed by a local message announcement (if defined).
Your
Agility offers the following kinds of arming:
Away arming:
Away arming prepares all of the system's intrusion detectors to activate an alarm
if violated, and is used when leaving the premises. The system will arm after the
designated countdown time (Exit delay) and a local message will sound. Once
you have armed the system, exit via the designated final exit door.
Stay (Home) arming:
Stay arming activates only perimeter detectors (as defined by your installer),
enabling individuals to remain inside and move about the premises while the
system is partially armed.
Partition arming: Partition 1/2/3/ followed by or :
One of the Agility 's advantages is its ability to divide the system in up to 3
partitions. Each partition may be viewed as a separate security system, each of
which can be armed and disarmed individually regardless of the condition of the
other.
Partitions can be armed or disarmed one at a time, or all at once, and each
partition can be armed at Stay or Away. Only users that have been defined to
operate multiple partitions can operate more than one partition and arm/disarm
all partitions at once
Force Arming:
Force arming arms the system regardless of open zones. Your installer must
enable this option.
Note : Force arming the system results in leaving part of the system unsecured.
Before arming the system check the Ready LED and make sure that the system is ready
to be armed. If the system is NOT ready to be armed secure or bypass the violated zone(s),
and then proceed. The following example refers to Full Arming.