Risco Agility, Руководство пользователя

Страница: 18 / 32

Agility User Manual
Page 18
Bi-directional Audio Options after an Alarm
In the event of Burglary, Fire and Medical alarms, the Agility is able to report these
events and then stay on the line. This allows the monitoring service to perform Voice
Alarm verification, verify the alarm or Verification in order to verify a cause of event or
guide someone in distress.
Service call
The Service Call feature enables you to call the Monitoring Station by pressing a key. To
establish the service call press the button on the main unit or press simultaneously the
buttons on the bi-directional keypad.
Note: The Service call should be defined by your installer.
3.2 SMS Operation
SMS Remote Control
The Agility enables you to perform remote control operations using simple SMS
commands. The following section describes the SMS commands and the response of the
system to these commands.
Note: This application is available only if a GSM/GPRS module is installed in your system.
Operation SMS Message Structure Example
Arm all partitions of a
user code [Code] A 1234A
Disarm all partitions
of a user code
[Code] D 1234D
Arm by partition [Code] A [Partition No.] 1234A1
Disarm by Partition [Code] D [Partition No.] 1234D1
Bypass a zone [Code] B [zone number] 1234B05
Un-bypass a zone [Code] UB [zone No.] 1234UB05
Activate Output [Code] UOON [UO No.] 1234UOON1
Deactivate Output [Code] UOOFF [UO No.] 1234UOOFF1
Change FM number
[Code] FMPHONE [FM serial number]
NEW [New Phone No.)
1234FMPHONE 3
NEW0529692345
Get system status [Code] ST 1234ST
Get last alarm
memory
[Code] AL 1234AL
Get SIM credit level
(for prepaid cards)
[Code] CR 1234CR