Risco Agility, Руководство пользователя

Страница: 12 / 32

Agility User Manual
Page 12
To arm using Procedure
Away Arming: Press
Stay Arming: Press
Away arming:
Press
or
Hold your proximity tag for 2 seconds from a distance of 1-2 cm from the
center of the keypad's door until you hear three beeps.
Stay Arming: Press
Away Arming: Press
Stay Arming: Press
Note: If the Quick Arming option has been disabled in programming you must enter your user code at the
end of the operation when arming the system.
Away or Stay Arming: Press the
Ï
button on the key fob.
Note : The type of arming is defined by your installer that can define each key to do the
arming operation.
Note: Failing to arm the system will be followed by a local voice message, message on the keypad or Led
indication on the bi-directional remote control.
2.2 Disarming your system
Disarming your system causes the detectors not to trigger an alarm when violated. When
you enter the premises, the Entry Delay begins to count down. You must disarm the
system within the Entry Delay time to prevent the system from triggering an alarm. The
disarming operation will be followed by a local message announcement (if defined).
Your
Agility offers the following kinds of disarming:
System disarming:
Disarming deactivates the partitions assigned to the specified user code
Partition disarming:
Partition disarming enables you to disarm individual partitions within an armed
system