Ripmax Sigma EQ ECO II, Руководство по эксплуатации

Страница: 31 / 36

31
A>Measure VOL
I :12. 1V O: 19.87V
3.31 3. 31V 3. 31V
3.31 3. 31V 3. 31V
B>Measure TX/RX
Signal: 0us
Incorrect polarity connected.
Battery connection is interrupted.
Short-circuit of the output terminals.
In this program you can measure the DC voltage of the input (11-18V) and the output (0.1-28V).
In this program, the charger can measure the signal from an RX. Connect a Rx output (double
ended servo lead commonly called a gyro lead, Not Supplied) to the servo port on the left
corner of the charger. The charger will display servo output signal .
Warning and error information
Sigma EQ Eco II incorporates a variety of functions for the systems to verify processes and the state of the
electronics. In the case of an error the screen will display the cause of error and emit an audible sound.
A>Measure Input Voltage and Output Voltage
B>Measure TX/RX