Ripmax Sigma EQ ECO II, Руководство по эксплуатации

Страница: 10 / 36

10
To avoid a short circuit between the charge leads, always connect the charge
cable to the charger first, then connect the power source.
Reverse the sequence when disconnecting.
Do not connect more than one battery pack to this charger at any one time.
Li-Po Voltage level: 3.7V/cell
Max. charge voltage: 4.2V/cell - Allowable fast charge current: 1C or less
recommended. Consult the battery manufacturer for higher
Discharge voltage cut off level: 3.0V/cell or higher
Li-Fe Voltage level: 3.3V/cell
Max. charge voltage: 3.6V/cell - Fast charge current: 1C or less. Consult the
battery manufacturer for higher
Discharge voltage cut off level: 2.0V/cell or higher
Li-HV Voltage level: 3.8V/cell
Max. charge voltage: 4.35V/cell - Allowable fast charge current: 1C or less
Consult the battery manufacturer for higher
Discharge voltage cut off level: 3.0V/cell or higher
Pb Voltage level: 2.0V/cell
(Lead-acid) Max. charge voltage: 2.46V/cell - Allowable fast charge current: 0.4C
or less - Discharge voltage cut off level:1.75V/cell or higher