
8
④
Setting the Frequency span and the Number of analysis lines
Set up the Frequency span and the number of analysis lines so that the measured time waveform can be
observed clearly by the FREQ SPAN key and the LINE key. The details of a time waveform can be observed
when the frequency span is set to high, but the maximum display time becomes short.
⑤
Fixing a measured time waveform
When you read the amplitude of time waveform with cursor, press the PAUSE/CONT key. The measurement
changes to the paused state, and a measured time waveform is fixed.
To resume the measurement, press the PAUSE/CONT key one more time.
⑥
Zooming the X-axis and the Y-axis of the graph display
When the SCALE ON/OFF key is pressed, the display scaling function becomes operational. In this case, the
graph zoom symbol or the cursor move symbol is shown at the bottom left corner of the display.
The graph zoom symbol and the cursor move symbol can be selected by the SCALE EXPAND/MOVE key.
FREQ SPAN key
LINE key
SCALE
ON/OFF key
SCALE
EXPAND/MOVE key
Setting Frequency span
Setting Number of
analysis lines
Select an item from a popup list
Cursor