
20
6. Data store and recall
6.1 Store and recall operations of measurement data
①
Setting the Store Name
Press the MENU key, and go into the submenu [Measurement] from the Menu List. Then set the “Store Name”.
Specify the number which follows MAN_ like “0001” to any value.
Up to 1000 data can be stored in one “Store Name”.
②
Selecting store address and data storing
The store address is indicated at the upper right corner of display. This store address means the address
contained in a “Store Name” which was set up at the previous step. The measured data can be stored in the
indicated store address by pressing the STORE key. The store address can be selected by keys.
When the data already exists in the selected address, the background color of the address is displayed to red.
Data will be overwritten if the STORE key is pressed in this state.
STORE key
Select a store address
Store address
Stored data already exists
Setting the store name