
6
When the overload occurs, the background color of display changes to red and the “Over” indication appears
to the upper right side.
③
Reading the measured value
When the PAUSE/CONT key is pressed, the measurement
changes to the paused state, and a measured data is fixed
for reading the value. To resume the measurement,
press the PAUSE/CONT key one more time.
④
Storing the measured data
Store the data if necessary. When the STORE key is pressed,
the data at that time is stored on SD card in VA-12.
When in a paused state, the fixed data is stored.
3. Measurement in Time Waveform Mode
①
Selecting the analysis function to “Time waveform mode” after common setups
Press the VM/TIME/FFT key to select the Time waveform mode. The analysis function can be selected to
each mode as shown in the following figure by pressing the VM/TIME/FFT key.
PAUSE/CONT key
STORE key
Vibration Meter Mode Time Waveform
Mode
FFT Mode
VM/TIME/FFT key
RANGE key
Overload state