Rinstrum axleWEIGHr Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 30

Rinstrum axleWEIGHr Скачать руководство пользователя страница 16

Operator Manual Rev 2.01

Page 14

AXLE-613-201

1.18 USB Operation

When using the USB drive provided by Rinstrum you will want to search for the folder
named “Data Store”. (See section 1.23) The 2 files you will be using need to be moved
to the ROOT directory of the USB drive. (This means the upper most level of the USB
directory)

There are 3 options to select once the USB drive has been detected by the console.



TO USB

This means you will send the log.csv file to the USB drive. (This creates a copy
only – the original log file will remain on the console)



FROM USB

This means you will duplicate the files from the USB drive. If you have modified
the truck.csv file or the harvest.csv file then they will overwrite your truck
configuration and your farm & field configuration.



EJECT USB

This will prepare the console for the USB drive to be removed.

1.19 Printer Operation

The Kiosk style printer uses thermal paper that will need to be loaded upon first use. This
paper is a special thermal style paper that can be ordered directly through Rinstrum Inc.
Load the paper into the printer with the inside facing upwards as shown below. If the
power is on to the printer the paper sensor will feed automatically once paper is detected.

«
...
14
15
16
17
18
...
»

Содержание axleWEIGHr































Отзывы:

Нет отзывов