Rinstrum axleWEIGHr, Справочное руководство

Страница: 12 / 30

Operator Manual Rev 2.01
Page 10
AXLE-613-201
1.13 Creating a Permanent Truck ID (Create & Setup)
(Press & Hold the Up key, set name using number pad, select 1 or 2 pass, enter tare weight if
one pass.) Farm & Field selection will then prompt (see section 2.10.2.)
Editing Truck Data (existing)
Select the truck you want to configure. Proceed through the rest of the prompts. Press
cancel key to return to weigh mode with no truck selected.
Now press & Hold the TRUCK key to change truck name and method from one pass /
two pass. Complete farm & field setup as shown above.