Rinstrum axleWEIGHr, Справочное руководство

Страница: 14 / 30

Operator Manual Rev 2.01
Page 12
AXLE-613-201
1.15 Stability Considerations
Some functions (e.g. Tare and Zero) require a stable weight. These functions will wait
for up to 10 seconds for stable weight. If a stable weight is not available ‘MOTION
ERROR’ is displayed and the function is cancelled.
1.16 Traffic Lights
While at Zero & stable weight the traffic lights should both be off. There are various
conditions that will activate the lights. If there are errors the RED light will activate. See
table below.
TRAFFIC LIGHT STATUS
Code Description
RED SOLID ON ERROR – CHECK SCALE DISPLAY FOR
CODE
RED 5 SEC THEN OFF NORMAL OPERATION (TICKET PRINTS)
GREEN SOLID ON CLICKER PRESS DETECTED/ TRUCK IN
PROCESS OF WEIGHING/ MOTION
DETECTED OVER 1000 lbs
BOTH
OFF GREEN & RED
ARE BOTH OFF SCALE IS IN IDLE MODE/ NO POWER TO
SCALE