Linear installation guide 13563-H 08-19 |
9
Hearths
Any hearth that is installed in the shaded area (shown below) must
be capable of withstanding temperatures up to 100 °C. Some
laminated materials may buckle or delaminate when exposed to
high levels of heat.
200
45°
300
100
1
2
3
1.
A 3 mm air gap between the hearth and lower fire lip is critical. This allows for air flow to critical
components and for correct operation of the IR receiver.
2. The lower support rail is only required if the side rails are used, side rails are required for
combustible wall linings.
3.
The finishing trims latches are not needed if a hearth is installed, they can be snapped off if
they are in the way.
Please note:
Shaded area
must be capable
of withstanding
temperatures up to
100 °C.
