Rinnai RF1800 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 24

Rinnai RF1800 Скачать руководство пользователя страница 10

Rinnai

8

RF1800 OIM

INSTALLATION SAFETY

WARNING

This appliance must be installed by a suitably qualified person in accordance with local codes and AS/

NZS 5601

This is primarily a decorative appliance and has not been designed as a space heater

This appliance has been tested to AS 4558

DO NOT

operate this appliance without reading and understanding these instructions first

This appliance is designed for installation into a timber framed construction and new or existing masonry

installations

NOT INTENDED FOR FIREPLACE INSERT

Only the approved flue components specified by Rinnai

MUST BE

used

This appliance must be installed into a well ventilated room in accordance with AS/NZS 5601

This appliance is designed for indoor installation only;

NOT TO BE INSTALLED OUTDOORS

Rinnai is not responsible for incorrect or improper installations

All installations must be carried out by authorised personnel

Be sure to complete the installer details section of the user guide before signing off the installation

DO NOT

place articles on or against this appliance

DO NOT

store chemicals or flammable materials, or spray aerosols near this appliance

DO NOT

operate with panels, covers or guards removed from this appliance.

DO NOT

modify this appliance

«
...
8
9
10
11
12
...
»

Содержание RF1800

























Отзывы:

Нет отзывов