Rinnai REU-2007W, Руководство по обслуживанию

Страница: 21 / 69

* 3
.44, 6-2, 8
85
C outgoing hot water can be achieved by placing dip switches No.3 and No. 5 to the ON position, cutting
and then sealing the by-pass tube to completely restrict the flow of water through it and disconnecting the
remote controls.
The by-pass must be sealed if the 85
C setting is selected in single or multi-point installations.
Note: The remote control(s), if connected will override the 85
C setting, and maximum hot water
temperature will revert back to 75 C. Condensation above the burner may occur at temperatures of 55 C or
lower when the bypass is restricted.
#++/<
85 C outgoing hot water can be achieved by placing dip switches No. 5, No. 6 and No.7 to the ON position,
cutting and then sealing the by-pass tube to completely restrict the flow of water through it and disconnecting
the remote controls.
The by-pass must be sealed if the 85 C setting is selected is selected in single or multi-point
installation.
Note: The remote control(s), if connected will override the 85 C setting, and maximum hot water
temperature will revert back to 75 C. Condensation above the burner may occur at temperature of
55 C or lower when the bypass is restricted.
°
°
°
°
° °
°
°
°
°
°