Rinnai New Zealand Ltd.
Neo Operation Manual: 11907-C
03-11
18
etr models: Wireless controller operation
Modes of operation
Manual mode
• Temperature can be set at any level.
• Time and day of week does not need to be set.
With the controller turned on, press and release the A/M button until the word ‘Manual’
appears on the LCD. Press and hold the UP and DOWN button to increase/decrease the
temperature by 1 °C.
Automatic mode
• Temperature is regulated to a programmed level and time.
• Time and day of the week needs to be set.
• At any time the temperature may be adjusted up or down.
Flame control mode
Allows you to set your preferred flame setting and override the set temperature—your heater
will not automatically turn itself off (unless the room exceeds 40 °C).
To activate the flame mode (as shown below):
1. Turn the controller on (PWR and OK).
2. Press the A/M button until the ‘Manual’ or ‘Auto’ symbol disappears.
3. Use the UP and DOWN button to adjust the flame setting. When using for the first time,
the controller will default to F1 (lowest setting), and then it will default to the last selected
flame setting when used again.
Flame mode
Nothing will be displayed in this window when operating in flame mode.
A/M
PWR
T
P
DOWN
UP
OK
Flame setting
Flame symbol will correspond to flame setting selected. F1-F7 (lowest to highest).
Change between manual, automatic, and flame mode
Press and release the A/M button.
