Rinnai N-BW2, Руководство пользователя, Страница: 16 / 48

N-BW2 Networker Bridge (WIFI) API-N-BW2 Issue 1.3 Page 16 of 48
4.2 System Related – Group 1: {“SYST”:
This group identifies system wide information and is always sent by the N-BW2 as part of the status information
reported. In TABLE 4.2a below the “R” in the COMMAND column indicates read-only operation while a “W”
indicates read/write functionality.
GROUP2 COMMAND Values Description
{“CFG”: {
--- ---
General Configuration
“MTSP”: ”$”
R Y/N Multi set point control enabled Y = Yes N = No
“DF”: “$”
R Y/N Dual fuel control allowed Y = Yes N = No
“TU”: “$”
R C/F Temperature display units
C = Celsius F = Fahrenheit
“CF”: “$”
R 1/2 Clock display format (12 hour/24 hour)
1 = 12 hour 2 = 24 hour
“ZA”: “$”
R Alphanumeric Zone A description (16 characters maximum)
“ZB”: “$”
R Alphanumeric Zone B description (16 characters maximum)
“ZC”: “$”
R Alphanumeric Zone C description (16 characters maximum)
“ZD”: “$”
R Alphanumeric Zone D description (16 characters maximum)
“VR”: “####”
R 0000 - 9999 N-BW2 firmware version
“CV”: “###”
R 000 - 999 N-BW2 WiFi module firmware version
“CC”: “###”
R 000 - 255 Certificate checksum value
“NC”: “$”
R Y/N N-C7 based system Y = Yes N = No
{“AVM”: {
“HG”: “$”
R Y/N Gas heating Y = Yes N = No
“EC”: “$”
R Y/N Cooling (Evaporative) Y = Yes N = No
“CG”: “$”
R Y/N Cooling (Add-on) Y = Yes N = No
“RA”: “$”
R Y/N Reverse-cycle air-conditioning Y = Yes N = No
“RH”: “$”
R Y/N Reverse-cycle heating Y = Yes N = No
“RC”: “$”
R Y/N Reverse-cycle cooling Y = Yes N = No
{“OSS”: {
--- ---
Overall System Operation
“DY”: “$$$”
R MON-SUN Networker day of the week
“TM”:
“hh:mm”
R 00-23:00-59 Networker time
“RG”: “$”
R Y/N N-BW2 Module is registered with the master networker
Y = Yes N = No
“ST”: “$”
R N,C,P,U,Y
Operating state
N = Normal Operation C =
Clock
Setting
P =
Parameter
Setting
U = User Settings Y = Pin number entry
“MD”: “$”
W H,E,C,R,N
Operating mode
H = Heating E =
Cooling
(Evap)
C =
Cooling
(Add-on)
R = Reverse Cycle N = None
Continued…