7.
Install the rear panel to inside of rear trolley legs as
shown. Align the holes on the trolley rear panel
with the threaded holes on rear trolley legs. Tighten
securely using four (4) screws provided.
8.
Install each side panel to inside of front and rear legs
and bottom shelf as shown. Align the holes on the
side panel with the threaded holes on front and rear
legs and bottom shelf. Tighten securely using four
(4) screws provided.
10. Install the magnetic door stop to the bottom shelf and
the door bracket. Align the holes on the magnetic
door stop with the threaded holes on the top of the
bottom shelf and bottom side of door bracket.
9.
Install the door bracket to the inside of front legs.
Align the threaded holes on the door bracket with
the holes on front trolley legs using two (2) screws
provided on each side.
11. Remove the white protective film from the stainless
steel doors. Attach a door handle to each front door.
Be careful not to scratch the door surfaces.
12. When installing the front doors, make sure the door
bolt holes are located on the hinge sides of the
trolley legs.
13. Install each front door by inserting partly-threaded
screw through the lower door screw hole of the
front door and into the tapped hole of the trolley
bottom shelf. Next, align the upper door screw hole
of front door with the tapped hole in the bottom of
door bracket. Insert partly-threaded screw provided.
Tighten both screws securely.
14. Install the spice basket to the inside of left door.
Align the threaded holes on the spice basket bracket
with the holes on the spice basket. Tighten securely
using two (2) screws provided.
A
S
S
E
M
B
L
Y
11
11
S132G04082 (x4)
S132G04082 (x8)
S132G04082 (x4)
S135G04332 (x4)
S132G0482 (x4)
S132G04121 (x4)
Door handle
S135G04101 (x4)
Door stops
Rear panel
Gas cylinder pull-out
tray assembly
Side panel – left
Side panel – right
Spice basket
Door
S132G04802 (x2)