– 3 –
* If another built-in appliance (e.g. dishwasher, washer, etc,) is to be installed under the built-in hob, keep a
clearance of at least 10mm from the bottom of the built-in hob. If the installation of the appliance underneath
requires a different distance, adopt the larger value.
若在嵌入式平面爐安裝他器 ( 如洗碗碟機﹑洗衣機等 )
請保留最少
10
毫米的距離
若他器的安裝指引要求不的間距 , 應採用較大者
* The built-in hob should be installed with a distance of more than 15cm away from surrounding combustible
materials.
爐的安裝置應與周圍可燃物料距離
15
厘米
* If the built-in hob is to be installed on top of a built-in oven, a partition between two appliances is required
with all gaps being sealed. It is to avoid the infl uence of air draught on the operation of the built-in hob when
the oven fan is running.
煮食爐方如設有嵌入式焗爐 , 必須加裝隔層板並將有縫隙密封 , 避免焗爐的風機氣流影響煮食
爐運作
* In case that a partition plate is installed underneath the appliance, keep space by at least 10 cm in between.
若隔層板被安裝在器，請確保保持少 10 米的空隙
* Make sure that the following parts are fi tted properly before use:
使用前請確定配件已置於確置 :
1. Pan Support
爐架
Fit Pan Support into Glass Top Plate.
爐架確地安放於玻璃面板
Install the pan support projection to the hollow
side of the Top Plate.
將爐架部安裝在頂面板的入部
2. Drip Pan
爐碟
Please set drip pan so that it does not lift up or
tilt.
擺放爐碟時 , 注意不要抬起或傾斜
Pan Support Projection
爐架部
Drip Pan
爐碟
Top Plate Depression
面板部
RB-11N-C.indd Sec2:3
RB-11N-C.indd Sec2:3
2/10/2009 9:12:12 AM
2/10/2009 9:12:12 AM
