14
|
Continuous Flow Water Heater Operation Guide 04-12
When the shower saver/bath fill
operation finishes
Once the shower saver/bath fill
operation finishes, the following
occurs:
1. Flow from the shower/bath
hot water tap stops.
2. ‘Shower Saver/Bath Fill’ button
will flash.
3. Kitchen Deluxe Controller
(if fitted) ‘Bath’ indicator will
flash.
4. A tone will sound.
5. The voice prompt will say
“Bath fill is complete. Turn off
the bath hot water tap and
push the ‘Bath Fill’ button.
Follow the voice prompt
instructions. Note, the water
heater will not allow hot water
to flow from any fixture until the
‘Shower Saver/Bath Fill’ button has
been pressed.
Using multiple controllers
The water heater can be turned
on and off at any water controller.
If more than one controller is
fitted, press the ‘Transfer’ button
to transfer priority to the desired
water controller.
