background image

  

18 

 

 |   

iHeat operation guide: 12063-A 01-13

Limited Warranty

Rinnai warranty summary

 IHEAT CENTRAL HEATING SYSTEM

Parts

Labour

Thermostat

 3 years

3 years

Heat exchanger

Pump

All other 
components

Rinnai Infinity

Refer warranty 
statement supplied 
with the unit

All terms of the warranty are 

effective from the date of 

installation of the Rinnai iHeat 

system. Proof of installation will be 

required.

General warranty terms

Rinnai reserves the right to 

make modifications and change 

specifications and its parts without 

notice.

For the purposes of the Consumer 

Guarantees Act 1993, Rinnai only 

guarantees the availability of repair 

facilities and spare parts for the 

express warranty periods recorded 

in the Rinnai warranty summary 

table.

If the Rinnai iHeat central heating 

system is being acquired for 

personal, domestic or household 

use, this warranty does not limit 

any consumer rights or guarantees 

that may apply under the 

Consumer Guarantees Act 1993. 

If the product is being acquired 

for the purposes of a business, 

the provisions of the Consumer 

Guarantees Act 1993 do not apply 

and no other warranties (either 

express or implied by law) apart 

from those stated in this warranty 

apply.

Warranty terms and conditions

All terms of this warranty are 

effective from the date of 

installation. The attending service 

person reserves the right to verify 

this date.

All Rinnai appliances must 

be installed, commissioned, 

serviced, repaired and removed 

in accordance with the 

manufacturer’s instructions, local 

regulations, and municipal building 

codes by persons authorised by 

local regulations to do so.

All appliances must be operated 

and maintained in accordance 

with the manufacturer’s operating 

instructions.

The warranty applies only to the 

components supplied by Rinnai. 

It does not apply to components 

supplied by others, such as, 

isolating valves, electrical switches, 

pipe work, electrical cables, fuses, 

and where applicable components 

supplied by others, but not limited 

to these.

Where the appliance has not 

been sited in accordance with the 

installation instructions or installed 

such that normal service access is 

difficult, a service charge will apply. 

If at the discretion of the attending 

service person the installation 

is deemed illegal or access is 

dangerous, service will be refused. 

Any work required to gain access 

to the appliance will be chargeable 

by the attending service person 

(for example, removal of walls, or 

the use of special equipment to 

move components, but not limited 

to these).

Where a failed component is 

replaced under warranty, the 

balance of the original appliance 

warranty will remain effective. The 

replacement part or appliance 

does not carry a new warranty.

Rinnai reserve the right to transfer 

functional components from 

defective appliances if they are 

suitable.

Rinnai reserve the right to have the 

installed product returned to the 

factory for inspection.
Where the iHeat central heating 

system is installed outside the 

metropolitan area or further than 

40 km from a Rinnai authorised 

service centre, travel costs shall be 

the owner’s responsibility.

Warranty exclusions

The following exclusions may 

cause the warranty to become void 

and will result in a service charge 

and costs of parts (if required).

 

-

Accidental damage and acts 

of God. 

 

-

Failure due to abuse or misuse, 

improper maintenance or 

improper storage. 

 

-

Failure due to incorrect or 

unauthorised installations. 

 

-

Failure or damage caused by 

alterations, service or repair 

work carried out by persons 

other than a Rinnai service 

person or service centre. 

 

-

Where the iHeat has failed 

directly or indirectly as a result 

of poor water quality outside 

the limits specified. 

 

-

Where it is found that there 

is no fault with the appliance 

and the issue is related to the 

installation or is due to power/

gas failure. 

 

-

Where it is found that 

the Rinnai Infinity water 

temperature has been set to 

higher than 75 °C. 

 

-

Subject to any statutory 

provisions to the contrary, 

Rinnai does not accept: 

a.  liability for consequential 

damage or any incidental 

expenses resulting 

from any breach of the 

warranty. 

b.  claims for damage to 

buildings or any other 

consequential loss either 

directly or indirectly due 

to leaks from the iHeat 

system or any other faults.

Содержание iHeat





















Отзывы: