Evolve 950 Installation Guide: 12471-A 01-14
|
21
Install inner and outer frames
Installing the outer frame
1. Hook the inside fold of the outer frame to the top lip of the engine body.
2. Rotate the bottom of the outer frame in towards the engine body, connect the control panel cat 5
cable, and secure with the two retaining screws.
Mounting brackets
Lip of engine body
Two retaining screws
Tabs on inner frame
Lip of combsution chamber glass
Magnets
Installing the optional mesh guard
The optional mesh guard, if purchased, needs to be installed before the inner frame as the inner frame
holds it in place. Hook the mesh guard over the two top mounting tabs on the engine front and rotate
towards the engine body.
Installing the inner frame
1. Hook the tabs of the inner frame to the top lip of the combustion chamber glass.
2. Rotate the bottom of the inner frame in towards the engine body allowing the magnets to secure
the inner frame to the engine.
Mounting tab