Rinnai Energysaver RHFE-556T, Инструкция по установке и эксплуатации, Страница: 32 / 36

– 30 –
1. How to connect exhaust pipes
To connect the exhaust pipes, fit the male end into the female end and clamp with pipe stopper A to
prevent slipping. The exhaust pipe can be telescoped to the required length; do not cut it.
Female end
Exhaust pipe
Pipe stopper B
Male end
Pipe stopper B
Pipe stopper A
Female end
Male end
Exhaust pipe
Fit inside
2. How to connect air intake hose
Screw hose joint half of its length onto the air intake hose, then screw another air intake hose into the joint.
The hose can be cut to the required length.
IMPORTANT: The PVC air line is longer than the exhaust line and may need to be cut to size. Be
sure, however, to thoroughly deburr all rough edges.
Main unit air intake hose
Air intake hose
Hose joint
Screw in counterclockwise
Air intake hose
Air intake elbow
Pipe stopper A
Fit inside
Connect bent pipe
Female end Male end
3. Affixing the air intake hose and exhaust pipe 4. How to use the bent pipe
Screw B
Wall
Air intake
hose
Screw A
Pipe clamp
Exhaust pipe
Wall fixture
Wall
Air intake
hose
Screw A
Nut
Pipe clamp
Exhaust pipe
Adjust the angle
• Set the air intake hose and exhaust pipe into
the pipe clamps, screw the clamp onto the
wall fixture, and affix to the wall with screw B.
• The air intake hose and exhaust pipe can
also be screwed onto the wall using the pipe
clamp and the nut.
With the exhaust pipes inserted into the ends,
bend the bent pipe to the angle required for
installation.
This part is mainly used for curves and for
connection to vent terminal.