Rinnai Energysaver RHFE-556T, Инструкция по установке и эксплуатации, Страница: 23 / 36

– 21 –
FITTING UNIT
AIR INLET HOSE
LOCKING CLAMP, SCREW CLAMP AND
INSULATION.
The following components can be fitted by reaching
down the rear of the appliance as it is positioned
against the wall.
1. Connect the flue outlet to the manifold by
extending the stainless steel sliding tube until it
is fully inserted into the manifold.
Detail of Hose clip
Hose clip
Inlet hose
Manifold
Inlet hose
Inlet elbow
Plastic tie
Sliding Tube
Slide
Do not extend flue tube
beyond red line.
Manifold
2. Fit the locking clamp over connection between
sliding tube and manifold. Engage the hook
and rotate it until it snaps against the body of
the clamp.
Locking
clamp
Flue outlet
Sliding tube
Manifold
Hook
Locking
Clamp
3. Fit the screw clamp between the sliding tube
and the flue elbow. Secure with the 4 mm
screw supplied. The flue outlet is now locked
into position.
Flue elbow
Flue Outlet
sliding tube
Manifold
Locking clamp
screw
Flue Outlet tube
screw clamp
4. Slide the insulation sleeve up to the flue
manifold, slip the securing clip over the sleeve
as shown.
Flue elbow
Sock
Flue outlet
Sliding tube
Slide to here
Fit clip
Slide insulation sock