Rinnai Energysaver RHFE-556T, Инструкция по установке и эксплуатации, Страница: 14 / 36

– 12 –
ERROR MESAGES
The Energysaver 556T has the ability to check its own operation continuously. If a fault occurs, an
Error Message will flash on the Digital Display of the control panel. This assists with diagnosing the
fault, and may enable you to overcome a problem without a service call.
Please quote the code displayed when inquiring about service.
In all cases, you may be able to clear the Error Message simply by turning the heater OFF, then ON
again.
If the Error Message still remains or returns on the next operation contact Rinnai UK Ltd or your
Supplier and arrange for a service call.
CODE DISPLAYED FAULT
Missed Ignition 16
LO
20
HI
22 ・ 24
24 ・ 26
18 ・ 20 ・ 22
20 ・ 22 ・ 24
LO ・ 16 ・ 18
16 ・ 18 ・ 20
18
・
20
LO
・
16
26
22 ・ 24 ・ 26 ・ HI
Flame failure
Overheat
Room overheat
Room Temperature
Sensor faulty
Overheat Temperature
Sensor faulty
Sparker failure
Combustion fan failure
Faulty ON/OFF switch
Faulty solenoids
Faulty Flame Rod
Communication Error
REMEDY
Check gas is turned ON.
Service call if repeated.
Check gas is turned ON.
Service call if repeated.
Clean filter
Service call if repeated.
Lower room temperature
to less than 40˚C.
Service call.
Service call.
Service call.
Service call.
Service call.
Service call.
Service call.
Turn heater OFF,
then ON again.
16 ・ 18 ・ 20 ・ 22 ・ 24
Flue Block Check around flue terminal