RinKmo EI06, Руководство по устранению неисправностей

Страница: 24 / 42

rinkmo.team@outlook.com
Page 24

E-0/1 Error code |Inlet temperature sensor
If you unit is displaying an E0/1 error code. Your unit is notifying you the Inlet
temperature sensor is not re
ading correct Temperature and may need to be check and replaced. In order to resolve
this issue please follow the below steps.
By passing E1 Error Code
Remove PCB cover
Check if terminal loose or not,replace terminals accordingly.
Remove thermal sensor anti-clockwise
Restore new sensor in reverse sequence and re-connect
Check terminal loose or not
If this does not resolve the issue. please have your model number and order number
ready. If necessary, please send us videos related to the operation and installation
of the water heater. We will determine the water heater problem based on the video
and provide a solution.
a. Contact.us
https://rinkmo.net/
b. Amazon.com
https://www.amazon.com/dp/B0823X8HZK?ref=myi_title_dp