RinKmo EI06, Руководство по устранению неисправностей

Страница: 16 / 42

rinkmo.team@outlook.com
Page 16

Activity C |LED display light is illuminated on heater, but unit is
not heating.
（
the red light on
）

Activity F |LED display light is illuminated on heater, but unit is
heating Intermittently
（
the red light off
）
When the LED display light is illuminated on heater, but unit is heating Intermittentl
（
the red light off
）
,the display board is broken .Pls replace the display board.
Please follow the steps below
1.Unscrew front cover of unit.
In order to remove the front cover you will need to unscrew 4 phillip head screws
located on each corner of the cover.
Two screws located on top of cover facing up and two screws located on the bottom
of cover facing down.
2. Remove screws
3. Remove display
4. Replace with the new display
5. Secure with 4 screws
6. Install PCB
7. Connect with terminals
8. 8.Check terminal fasten or not
9. Secure PCB