7 Maintenance
7-2. Regular maintenance mode
- 33 -
SD-2600
User Mode
In "1-3.", press the SET key.
Then press the SET key
again for three seconds.
Regular Maintenance Mode
2-0. Test Mode
Perform various tests.
Test Mode
=> P34
2-1. Zero Adjustment
Perform the zero
adjustment.
Zero Adjustment
=> P39
2-2. Span Adjustment
Perform the span
adjustment.
Span Adjustment
=> P40
2-3. Zero/Span Initialization
Initialize the zero/span
adjustment after the sensor
is replaced.
2-4. Environmental Setting
Set various operations and
functions.
Environmental
Setting
=> P38
2-4.0 and 2-4.3 to 2-4.F are
factory-set. They are not
typically used by the user.
2-5. Various Electrical
Settings Display
Display various electrical
settings. This is not used by
the user.
2-6.
Enters the factory mode.
This is not used by the user.
2-7.
Returns to the user mode.
rET. is displayed.
Press the SET
key again to
return to the user
mode.
To 2-0. Test Mode
LED
