4 How to Use
4-5. How to wire
- 18 -
SD-2600
CAUTION
ATEX/IECEx Specifications:
Ensure the tightening torque for the cable gland and seal plug to be 40 N
･
m or larger.
TIIS Specifications:
Tighten a cable gland with a tool until a clearance between the cable gland and a main unit case
is below 1.5 mm.
If it is difficult to tighten the cable gland, grease its screw part and then tighten it with the tool.
<Attaching External Cable>
The way to attach the external cable is different from specifications. Attach the external cable appropriately,
referring to the following information.
ATEX/IECEx Specifications
Attach the parts in the following order: cable grand, eccentric washer, washer, and rubber seal to the
cable, then connect the cable into the main unit and screw the cable gland to tighten the rubber seal.
TIIS Specifications
Attach the parts in the following order: cable grand, washer, and rubber seal to the cable, then connect
the cable into the main unit and screw the cable gland to tighten the rubber seal.
Below 1.5mm
（
TIIS Specifications
）
