3 Product Components
3-2. Names and functions for each part
- 8 -
SD-2600
3-2. Names and functions for each part
(1) MENU/ESC key
Used to enter the maintenance mode.
It is also used to cancel in a specific mode.
(2) SET key
It is used for value confirmation and so on in a specific
mode.
(3)
key
Used to switch menus or change a value (UP).
(4)
key
Used to switch menus or change a value (DOWN).
(5) Power lamp
Power lamp
Detection mode: It lights up in green.
Maintenance mode: It blinks in green.
(6) Alarm lamp
Alarm lamp. It lights up in red when the alarm setpoint value
is reached.
(7) Fault lamp
Fault lamp. It lights up in yellow when an abnormality is
detected in the gas monitor.
(8)
Concentration value
display
Displays the gas concentration and so on.
(8) Concentration
value display
(5) Power lamp
(6) Alarm lamp
(7) Fault lamp
(1) MENU/ESC key
(2) SET key
(4) ▼ key
(3) ▲ key
