7
・
Connection between gas sampling junction tube and sampling tube (Optional specification).
By holding the socket of gas sampling junction tube and the plug of sampling tube by fingers
and plug in to the arrow mark until it gets a ticking sound.
Warning
・
As this is used in dangerous zone, be sure to use it with carrying case.
Caution
・
Be sure to plug in the gas sampling tube and junction tube.
If not surely connected, the accurate measurement cannot be carried out.
・
Be sure to mount the filter tube with the flowmonitor.
If measure without filter, it will be a cause of trouble by sucking dust, water
and oil etc.
Sampling tube
Plug
Socket
Gas sampling relay tube
