Riken Keiki CO-03, Руководство по эксплуатации

Страница: 16 / 37

14
4-4. How to detect
After air calibration, attach the gas monitor to
the top of the breast pocket with the alligator
clip not to hide the sensor. The detection
mode is used for normal operations.
The gas monitor consists of the following modes.
NOTE

Open the clip as shown in the right
figure and attach it to the top of the
breast pocket, etc.

The clip can be turned by 45
degrees at a time.
When the gas concentration displays
less than the alarm setpoint, the
alarm can be reset by pressing any
button down.
Turn off the
monitor and take
an appropriate
action
depending on
the failure.
After air calibration is successfully
completed, it automatically returns to
the detection mode.
Detection mode
Air calibration mode
Display mode
Gas alarm <Self-latching>
Fault alarm <Self-latching>
Press the
MODE
button
Pressing the
MODE button or
performing no
operations for
more than 20
seconds returns
the gas monitor
back to the
detection mode.
Keep the AIR
button