|
19
EN
18
8. ASSEMBLY OPTIONS
Note
Only perform manipulation of the unit when the mains plug of the stove has
been disconnected (RIKATRONIC3) and the stove has cooled down completely.
Note
Take special care of your fingers and all stove panels and stove attachments
during any conversion work. Select soft bases to prevent scratches to your
living space furniture and stove panels.
Refitting the top smoke pipe connection to the rear
connection
Remove the stone top plate.
Remove the lamellas by loosening the two hexagon head screws.
Take off the pre-stamped round section in the rear panel.
Exchange the smoke tube outlet and cover plate.
Reassemble the new lamella (must be ordered as an optional extra) and the
stone in reverse order.
Reassemble the stone side panels in reverse order.
Removal of the stone
Take off the cover sheet. Check the securing device of the side sections to
prevent tipping. Now remove the two stone side panels. Put it on a soft base.
#8
#8
