|19
EN
18
Right side connection R3
Remove the right and left rear panels as described before�
Cut along the marked perforation of the right rear panel�
Cut with a saw along the marked perforation of the right side panel�
Replace the flue gas stack and the right cover against each other�
Place the correspondent flue pipe on the side� Make sure that
everything is tight!
Install the removed parts in reverse order�
Rear top connection R4
Remove the handle of the flue gas flap and the left rear panel as
described before�
Cut along the marked perforation of the heat protecting shield�
Remove the heat protecting shield� Loosen the 3 screws of the
bottom cover and remove it�
Cut along the marked perforation of the heat protecting shield�
#8
#8
#8
