T
I
+44 (0)1926 290 418 E
I
I
www.rigtec.com
20
ATTACHING RIGTEC
SWIVEL COUPLERS
To hang an Air Frame in
Portrait
Orientation with the Rigtec Swivel
Couplers, follow these instructions:
1.
Measure the distance between the two truss chords that will be
used to hang the Air Frame.
2.
Using the 32mm clamps, attach two Swivel Couplers at the
measured distance apart on the upper side bar. Repeat this on
the lower side bar so all
FOUR
Swivel Couplers are attached on
the same side of the Air Frame.
3.
Ensure the 32mm clamps are tight and hang the Quick Trigger
Clamps from the Truss.
4.
Ensure all four Quick Trigger Clamps are tightened to grip the
Truss chords.
Always use FOUR Swivel Couplers to suspend the Air Frame
The Removable Front Bar MUST be in place and secured when
the Air Frame is hanging in a portrait orientation.
Any suspended accessory must be independently secured with an
approved safety wire/s. Local laws or regulations should be consulted
regarding the additional safety of hanging equipment
1
3
2
4
