T
I
+44 (0)1926 290 418 E
I
I
www.rigtec.com
17
ATTACHING
AN ATOM GRIP
To attach an Atom Grip to the
Floor Projection Atom Grip Attachment
Plate of the Air Frame please follow these instructions:
Required Tools:
•
6mm Hex Key (Allen Key)
1.
Place the Atom Grip on to the Floor Projection Atom Grip
Attachment Plate. Line the M8 bolts up with the M8 Atom Grip
Threads.
2.
To help prevent damage to the M8 Atom Grip Threads it is good
practice to initially attach the bolts by hand. Attach each bolt
loosely, gradually tighten evenly.
3.
Once all bolts are located in the threads and loosely attached use
a 6mm Hex Key to tighten, tighten all four bolts evenly.
4.
Ensure all four M8 bolts are
torqued to 6±0.5 Nm (M8).
Any suspended accessory must be independently secured with an
approved safety wire/s. Local laws or regulations should be consulted
regarding the additional safety of hanging equipment
1
3
2
4
