RIGTEC AF02-X40 Скачать руководство пользователя

Страница: 10 / 27

+44 (0)1926 290 418 E

[email protected] W

www.rigtec.com

INSTALLING

A PROJECTOR

Required Tools:

•

10mm Spanner (for M6 Bolts)

•

13mm Spanner (for M8 Bolts)

See

‘

Installation Accessories

’

(page 8) for Bolt, Washer & Spacer

quantities & sizes.

Turn the projector upside down and place onto a stable flat surface.
To make the installation as easy as possible it

’

s recommended to

place the projector onto an object to raise the projector body around

100mm from the chosen surface. Also raising the Air Frame
projector plate as high as possible by adjusting the ratchet handles
can simplify the installation.

Place the provided spacers over the mounting points (threaded

holes) of the projector, the chamfered side of the spacer should be
facing up away from the projector body.

Carefully lower the Air Frame over the projector, ensuring the ratchet

handles are at the front of the projector. Carefully line the projector
threaded holes up with the associated holes in the Air Frame plate.

Using the provided Bolts, secure the recommended number of bolts
(Please Consult the Projector Manufacturer

’

s User Guide) through

the provided Washers, then through the Air Frame plate holes, then

through the provided Spacers and into the projector

’

s threaded

holes. Use a spanner to tighten the bolts.

Please Torque bolts to 4±0.5 Nm (Or as recommended by the Projector

Manufacturer in the Projector User guide)

Only use supplied bolts to connect Air Frame and Projector.

Содержание AF02-X40




























Результаты поиска

Содержание AF02-X40

Отзывы:

Похожие инструкции для AF02-X40

Бренды по названию

Популярные бренды

RIGTEC AF02-X40, Руководство пользователя

Результаты поиска

Содержание AF02-X40

Отзывы:

Похожие инструкции для AF02-X40

Бренды по названию

Популярные бренды