RIGTEC AF02-X40 Скачать руководство пользователя

Страница: 19 / 27

+44 (0)1926 290 418 E

www.rigtec.com

SWIVEL COUPLER
SAFETY INFORMATION

The following three pages detail how to suspend the Air Frame using
the Swivel Couplers in all three orientations, before attaching the

Swivel Couplers to the Air Frame please read the following safety
information:

Swivel Couplers

MUST ONLY

be attached to the Air Frame in

the

APPROVED LOCATIONS

(Images 1, 2 and 3 display the

approved locations highlighted in colour)

DO NOT

attach Swivel Couplers to any other part of the frame

other than those highlighted in Images 1, 2 and 3.

The approved locations should only be used for the correct

orientation. Please be aware, not all approved locations can be
used in all orientations –

DO NOT

use the floor projection

approved locations for landscape projection.

Please note, Swivel Couplers

MUST NOT

be attached to the

front removable bar.

Always use

FOUR

Swivel Couplers to suspend the Air Frame.

Any suspended accessory must be independently secured with

an approved

SAFETY WIRE/S.

Local laws or regulations should

be consulted regarding the additional safety of hanging
equipment.

Only stack a

MAXIMUM

TWO

Air Frames (AF02

X40), when

suspending with Swivel Couplers.

1. Landscape Projection

2. Portrait Projection

3. Floor Projection

Back

Top

Bottom

Right

Left

Содержание AF02-X40




























Результаты поиска

Содержание AF02-X40

Отзывы:

Похожие инструкции для AF02-X40

Бренды по названию

Популярные бренды

RIGTEC AF02-X40, Руководство пользователя

Результаты поиска

Содержание AF02-X40

Отзывы:

Похожие инструкции для AF02-X40

Бренды по названию

Популярные бренды