manualshive.com logo in svg

Rigol HDO1000 Series, Руководство пользователя

Поделиться
Скачать
Rigol HDO1000 Series Скачать руководство пользователя страница 165

If the specified channel is selected as the source, the channel will be enabled
automatically.

Select Cursor Type

Click or tap the Select toggle button to select "X" or "Y".

•

X: It is a pair of vertical solid (Cursor A)/dotted (Cursor B) lines, used for
measuring time parameters. The measurement results include AX, BX, ∆X, and 1/
∆X.

•

Y: It is a pair of horizontal solid (Cursor A)/dotted (Cursor B) lines, used for
measuring voltage parameters. The measurement results include AY, BY, and ∆Y.

Adjust Cursor Position

1. When "X" is selected, you can adjust the position of X cursor.

- Click or tap the input field of AX and use the pop-up numeric keypad to set the

horizontal position of Cursor A (X cursors). The horizontal axis indicates time,
and the unit of its setting value is the same as that of the horizontal unit. Its
adjustable range is limited within the screen.

- Click or tap the input field of BX and then use the pop-up numeric keypad to

set the horizontal position of Cursor B (X cursors). The horizontal axis indicates
time, and the unit of its setting value is the same as that of the horizontal unit.
Its adjustable range is limited within the screen.

- Click or tap the AX BX on/off switch to turn on/off adjusting the horizontal

position of Cursor A and Cursor B (X cursors) simultaneously. The horizontal
spacing between Cursor A and Cursor B (X cursors) remains unchanged.

2. When "Y" is selected, you can adjust the position of Y cursor.

- Click or tap the input field of AY, and then use the pop-up numeric keypad to

set the vertical position of Cursor A (Y cursors). The vertical axis indicates
voltage, and the unit of its setting value is the same as that of the vertical unit.

- Click or tap the input field of BY, and then use the pop-up numeric keypad to

set the vertical position of Cursor B (Y cursor). The vertical axis indicates
voltage, and the unit of its setting value is the same as that of the vertical unit.

- Click or tap the AY BY on/off switch to turn on/off adjusting the vertical

position of Cursor A and Cursor B (Y cursors) simultaneously. The vertical
spacing between Cursor A and Cursor B (Y cursors) remains unchanged.

You can also use the touch screen or the front-panel multipurpose knob 

 to

adjust the cursor. To configure the multipurpose knobs, please refer to 

Front Panel

Overview

.

 Measurements

Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

HDO1000 User Guide

151

Содержание HDO1000 Series













































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды