manualshive.com logo in svg

Rigol HDO1000 Series, Руководство пользователя

Поделиться
Скачать
Rigol HDO1000 Series Скачать руководство пользователя страница 134

Source

Click the Source drop-down button to select the source as CH1, CH2, CH3, and CH4.
When a source channel is selected, the selected channel automatically switches to the
ON state.

Auto Set

Click or tap AutoSetting to adjust the vertical scale and the offset of the operation
results to the optimal value according to the current configuration for you to better
observe.

Scale

Scale is used to set the vertical scale of the operation result. You can set the vertical
scale in the following ways.

•

In Vertical menu, rotate the corresponding multipurpose knob on the front
panel or click or tap the icon at the right side of the input field of Scale to
increase or decrease the scale value. You can also click or tap the input field to
input a specific value with the displayed numeric keypad.

•

Close the menu and then adjust the vertical scale with the pinch & stretch
gesture on the touch screen. You can also rotate the corresponding
multipurpose knob on the front panel to adjust the vertical scale. Please refer to 

Front Panel Overview

 to configure the front-panel multipurpose knobs.

Offset

Offset is used to set the vertical offset of the operation result. You can set the vertical
offset in the following ways.

•

In Vertical menu, rotate the corresponding multipurpose knob on the front
panel or click or tap the icon at the right side of the input field of Offset to
increase or decrease the scale value. You can also click or tap the input field to
input a specific value with the displayed numeric keypad.

•

Close the menu and then adjust the vertical offset with the drag gesture on the
touch screen. You can also rotate the corresponding multipurpose knob on the
front panel to adjust the vertical offset. Please refer to 

Front Panel Overview

 to

configure the front-panel multipurpose knobs.

Invert

Invert is used to enable or disable the inverted display of the waveform. For setting
methods, refer to descriptions in 

To Invert a Waveform

.

Waveform

This oscilloscope supports Main (default) and Zoom.

•

Main indicates that the measurement range is within the main time base region.

 Math Operation

HDO1000 User Guide

120

Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

Содержание HDO1000 Series













































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды