RF800 [Revision 1.0.0] 01.08.2018
Shafts Geometry Measurement Machine. RF800 Series
17
The
Deviation
column shows the difference between the actual value and the
measurement result. The calibration is successful if the deviation value doesn't exceed the
tolerance (
Tolerance for calibration
, see par.
7.2.3.
).
If the calibration is not successful, the following window appears:
Zones, in which the measurement result exceeds the tolerance, are shown in red.
Repeat the calibration procedure until you see the message informing about
success.
8. Intended use
8.1. Preparation for use
Preparation of the machine includes:
·
visual inspection,
·
installation,
·
switching on the machine,
·
setting parameters and forming the database of templates,
·
calibration of the machine,
·
metrological verification of the machine.
