Tapes geometry measurement system
[Version 1.0] 08
th
December 2014
8
9.
Cable connections scheme
Fig. 8 shows the cable connections.
Figure 8
Fig. 8 indicates:
1
– power supply, 2 – PDA, 3,6 – RS485 cable, 4 – switching center, 5 – power supply, 7
– micrometers RF651 (15 items), 8 – temperature sensors (3 items).
(!)
The power should be switched off while mounting cable connections.
10. Software
10.1. Main functions
The software provides:
receipt and analysis of data from micrometers and temperature sensors with
display and storage of measurement results;
indication out of the valid values;
calibration of thickness measurement subsystem;
system setup;
system self-diagnosis.
10.2. Measurements
After being switched on the RF307 device loads the program and shows the
main working window (Fig. 9):
