18
USER - SYSTEM MANAGER
- Turn the function selector to ON (
II
) and make sure that
the green power indicator lights.
The burner should now ignite and remain in operation
until the set temperature is reached.
If any ignition faults or malfunctions occur, the burner
performs a 'LOCKOUT SHUTDOWN'. This is shown by
the red button light on the burner and by the warning
light on the control panel.
b
If a “LOCKOUT SHUTDOWN” occurs, wait about 30
seconds before resetting the burner.
To reset the burner, press the red button light on the
burner. The complete ignition cycle will be repeated up
to the ignition of the flame.
If you are going to be away for a short period of time like
a weekend or a short holiday, etc., and outdoor tempera-
tures are above ZERO, proceed as follows:
- Turn the function selector to OFF (
I
) and make sure that
the green power indicator goes out
- Turn the system's main power switch OFF
b
Do NOT perform this procedure if outdoor tempera-
tures might fall below ZERO (risk of freezing).
In that case proceed as follows:
- Adjust the boiler thermostat to about the middle of the
section with one line
- Adjust the room thermostat to about 10°C.
20
40
60
80
100
0
120
20
40
60
80
100
0
120
TEMPORARY SHUTDOWN
20
40
60
80
100
0
120
This operation can be repeated 2-3 times at the most, at
intervals of at least one minute. If the problem persists
after that, call
r
’s Technical Assistance Service.
Содержание Tregi 3/100 NK
Страница 1: ...INSTALLATION USER OPERATION MAINTENANCE AND SYSTEM MANAGEMENT MANUAL CAST IRON BOILERS g N g NK...
Страница 46: ...46...
Страница 47: ......
